Wire Resharpening Device | Textile Carding Machines | Card Room Machinery & Accessories

Wire Resharpening

Wire Resharpening

Wire Resharpening

Wire Resharpening

Description :- Modern carding machines require metallic wire with finer blade thickness, shorter tooth height and "Cut to Point" geometry. These wires need proper maintenance for consistency and optimum carding action at high speed. Sharprite Wire Re-sharpening Device provides the perfect solution.
Sharprite wire re-sharpening device is developed by ICC to re-sharpen and activate all wire points available on mounted surface. Conventional grinders have some shortcoming for grinding of latest generation card clothing. Now a days card clothing made out of alloy-steel metallurgy with finer blade and 'cut to point' tooth geometry needs a light re-sharpening for restoration of carding power of wire points. The conventional grinders are set by observing the length of spark during its operation. Hence it requires a high level of skill for its precise adjustment; more so for latest generation of card clothing as the sparks are barely visible. A slight excess pressure during grinding will cause harsher grinding and may damage the wire points permanently.

In the Sharprite wire resharpening device, the spring loaded re-sharpening stone exerts pre-determined constant pressure on the mounted wire points. This eliminated the possibility of exerting excessive pressure on the wire points during the re-sharpening operation and avoids damage of the card clothing. Due to low pressure exerted by stone, the abrasion of the card clothing is very less.

This allow more number of resharpening, resulting consistent carding quality thoughout the life of metallic wires.

one main advantage achieved from this unit is that unlike conventional grinder the re-sharpening stone touches almost all wire points in each traverse of the stone, thus activating almost all points instantaneously.

Wire Resharpening

SALIENT FEATURES/APPLICATIONS
1.Traverse speed of the stone is adjusted to the cylinder rotation speed. This ensures that all the wire points get a gentle resharpening.
3. The abrasion of card clothing is minimised allowing more number of resharpening.
4.Works with compressed air, has no gear box, belt drive or complicated electronic system.
5.Easy to handle and maintain.
6.Suitable brackets are provided for different models of cards.


TECHNICAL DETAILS/SPECIFICATIONS

DIMENSION OF TRAVERSING UNIT 1400mm X 100mm X 100mm
WORKING LENGTH OF DEVICE 1100 mm
REQUIRED AIR PRESSURE FOR THE SHARPRITE WIRE RESHARPING DEVICE 5 BAR TO 6 BARS
INPUT POWER REQUIRED FOR CONTROL PANEL 220V, 50Hz,SINGLE PHASE
DETAILS OF ELECTRICAL COMPONENTS
i)Solenoid coils 4.5 Watt., Voltage-24 Volt.D.C.
ii) Reed switch Voltage 24 Volt. D.C.